Noble Threaded Hub Bearing Extractor Set

$220.00

From Noble

“After months of design work, prototyping and testing we are proud to release pre-orders for our latest bearing tool set. The threaded bearing extractor uses the Chris King style split collet to capture bearings in systems that have a spacer tube between bearings, however this tool will work to remove most bearings where the axle has already been removed (we make a tool for this HERE). “

Out of stock

Description

How Does It Work?

Let’s say we’re removing the outside 6803 (17x26x5) bearing from a Campagnolo freehub. First you’d select the 17mm bore extractor and the 26mm receiver cup. Then you set the bearing width to 5mm by moving the circlip to the correct groove on the brass collar. Grab yourself two 4mm allen keys, insert the tool into the bearing and tighten down the top bolt to expand the collet behind the bearing (this only needs 1/4 to 1/2 a turn). Next push the receiver cup up to the freehub and lock down the nut. keeping the 4mm allen key in the bearing end of the tool, tighten the 13mm (M8) nut with a spanner to extract the bearing. Job done.

This kit will work on hub, freehub and pivot bearings.

What’s Included?

  • 12mm Bore Extractor x 1
  • 15mm Bore Extractor x 1
  • 17mm Bore Extractor x 1
  • 20mm Bore Extractor x 1
  • 24mm Bearing Receiver Cup x 1
  • 26mm Bearing Receiver Cup x 1
  • 28mm Bearing Receiver Cup x 1
  • 30mm Bearing Receiver Cup x 1
  • 32mm Bearing Receiver Cup x 1
  • 37mm Bearing Receiver Cup x 1

This complete set of extractors will remove any of the 28 different bearing sizes listed below:

Bearing Code ID OD W
6701 12 18 4
6801 12 21 5
6901 12 24 6
63801 12 21 7
6001 12 28 8
6201 12 32 10
6702 15 21 4
6802 15 24 5
3802 15 24 7
15267 15 26 7
6902 15 28 7
15307 15 30 7
15268 15 26 8
61002 15 23 9
6002 15 32 9
3802 W 15 24 10
152610 15 26 10
6703 17 23 4
6803 17 26 5
63803 17 26 7
17287 17 28 7
6903 17 30 7
3803 W 17 26 10
6704 20 27 4
20307 20 30 7
6804 20 32 7
6904 20 37 9
3804 20 32 10

Reviews

There are no reviews yet.

Be the first to review “Noble Threaded Hub Bearing Extractor Set”

Your email address will not be published. Required fields are marked *